oil tank level measurement

V1.0 serials oil level gauge choose well known high class  CPU, high resolution Mold transmitter, and use special program to calculate .It continuously to detect the level change of the liquid, out put signal is stable.  

High accuracy (inaccurate less than 1mm). Th length of detect rod can be cut down to fit the height of tank body. Replace the origin oil level sensor to connect the oil meter directly, convent Flange for easily install, without extra screw to fixed.Wide voltage signal input to make sure not voltage restricted.

Application:
      Applicable to different trucks a,Cars, ship, water tank , engineering machinery, agriculture machinery, and construction machinery, etc

Lengths:
        • Completely customized. above100mm, the sensor can also be customized to fit.

Maintenance should consist of inspection to see that the float is free to move and coated with any substance , which would change its weight or volume significantly. IF this occurs, this float should be cleaned .This is easily accomplished without disturbing the installation . In addition , the stem may be wiped down to remove any  buildup.The only repair possible in the field is replacement of either the float or stem . Dents or nicks on the float  are usually of  no consequence to operation.

Applicaction:

1. Control of industrial processes and dosing tanks

2. Food and beverage industry

3.Level control in shipping industry

4.Chemical and textile industry

Other float level switch

About US

Our products logo

  reed switch stable water level measurement